YASKAWA CIMR-ZU A Series Programming Manual page 249

No
(Addr Name
e )
Carrier Frequency
L8-97
Reduction Selection
(3104)
during oH Pre-Alarm
<1> Default setting is dependent on parameter o2-04, Drive Model Selection.
<2> Parameter setting value is not reset to the default value when the drive is initialized.
<3> Default setting is determined by the drive model:
Setting 2: Models 2A0011 to 2A0211 and 4A0005 to 4A0096
Setting 0: Models 2A0273 to 2A0396 and 4A0124 to 4A0590
<4> Default setting is dependent on parameters A1-02, Control Method Selection, and o2-04, Drive Model Selection.
<5> Minimum is 0.0 in drive software versions PRG: 1017 and earlier.
LCD Display
Carrier frequency reduction protection selection. It is reduced
FC Sel dur OHAlm
to the carrier frequency at oH pre-alarm.
0: Disabled
0: Disabled
1: Enabled
1: Enabled
A 1 L Protection Function
Description alues Pa e
Default: 0
–
Range: 0, 1
A
2