YASKAWA CIMR-ZU A Series Programming Manual page 136

1 1 o Operator elated Settin s
o 11 U2 U Initiali ation
Resets the fault trace and fault history monitors (U2-
Initializing the drive using A1-03 does not reset these monitors.
Note:
No
o4-11
Settin No Action
The drive keeps the previously saved record concerning fault trace and fault history.
Settin 1 eset Fault Data
Resets the data for the U2-
returns the display to 0.
o 12 Monitor Initiali ation
Manually resets kWh monitors U4-10 and U4-11. Initializing the drive or cycling the power will not reset these monitors.
No
o4-12
Settin No Action
The kWh data are maintained.
Settin 1 eset Data
Resets the kWh counter. The monitors U4-10 and U4-11 will display "0" after they are initialized. Setting o4-12 to 1 and
pressing the ENTER erases kWh data and returns the display to 0.
o 1 Number o
Resets the Run command counter displayed in U4-02. Initializing the drive or cycling the power does not reset this monitor.
No
o4-13 Number of Run Commands Counter Initialization
Settin No Action
The Run command data are kept.
Settin 1 Number o un Commands Counter
Resets the Run command counter. The monitor U4-02 will show 0. Setting o4-13 to 1 and pressing the ENTER key erases the
counter value and returns the display to 0.
o 17 Set/ eset eal ime Cloc
The time setting screen will appear.
1 No
So t are (Addr LCD Display
ersion e )
Set Time
o4-17
PRG: 1012
0: Disabled
(3100)
and earlier
1: Enabled
Set Time
o4-17 0: — —
PRG: 1013
(3100) 1: Set
and later
2: Reset
1
Name
U2, U3 Initialization
and U3- monitors. Setting o4-11 to 1 and pressing the ENTER key erases fault data and
Name
kWh Monitor Initialization
un Commands Counter Initiali ation
Name
Name
Set/Reset Real Time
Clock
Set/Reset Real Time
Clock
and U3- ).
Description
Sets the current date and time for the Real Time Clock.
0: Disabled
1: Enabled
Sets the current date and time for the Real Time Clock.
0: — — No Setting
1: Real Time Clock Set
2: Real Time Clock Reset
Settin an e
0, 1
Settin an e
0, 1
Settin an e
0, 1
De ault
0
De ault
0
De ault
0
alues
Default: 0
Range: 0, 1
Default: 0
Range: 0 to 2