YASKAWA CIMR-ZU A Series Programming Manual page 208

2 Dri e Coolin Fans
A Circuit board coolin
Coolin Fan irin
1
Place the cooling fan connectors and guide the lead wires so they are held in place by the cable hooks.
2
Guide the lead wires so that they are held in place by the cable hooks and place the circulation fan connectors between
the fan and the fan unit.
Position the protective tube so the fan connector sits in the center of the protective tube. (Circuit board cooling fans
only)
2 8
A
B
an
Fi ure 2 8 Fan Unit Disassembly
A 1 to A
Cooling Fan B1
Relay Connector
Cooling Fan B4
Fi ure 2 87 Coolin Fan
Cooling Fan B3
Relay Connector
Cooling Fan B5
Fi ure 2 88 Coolin Fan
Protective tube
B Circuit board coolin
A 1 to A
Cooling Fan B2 Cooling Fan B3
Relay Connector Relay Connector
Cooling Fan B5
irin A 1 to A
Relay Connector
Cooling Fan B2 Cooling Fan B1
Cooling Fan B4
irin A 1 to A
an case