YASKAWA CIMR-ZU A Series Programming Manual page 209

Guide the lead wires through the provided hooks so the wires are held in place.
Double-check the relay connector to ensure that it is properly connected.
Installin t e Coolin Fan Unit
1
Reverse the procedure described above to reinstall the cooling fan unit.
Note Use a magnetized screwdriver when installing the screws to prevent the screws from falling.
2
Reattach the covers and HOA keypad.
Turn on the power supply and set o4-03 to 0 to reset the Maintenance Monitor cooling fan operation time.
Circuit Board Cooling Fan B6
Relay Connector
Fi ure 2 8 Coolin Fan
A 1 to A
Fi ure 2 Install t e Coolin Fan Unit
Circuit Board Cooling Fan B7
Relay Connector
irin A 1 to A
A 1 to A
2 Dri e Coolin Fans
2
2