YASKAWA CIMR-ZU A Series Programming Manual page 132

1 1 o Operator elated Settin s
No
o1-10
o1 11 User Set Display Units Decimal Display
Determines how many decimal points should be used to set and display the frequency reference.
No
o1-11
Settin No Decimal Point
Settin 1 One Decimal Point
Settin 2 o Decimal Points
Settin ree Decimal Points
o1 1 to o1 1 Fre uency e erence and Fre uency elated Monitor Custom Units 1 to
Sets the customer specified unit display for the frequency reference parameters and frequency related monitors when o1-03
is set to 3 and o1-09 is set to 15 as custom units.
The custom units consist of three characters selected from o1-13 to o1-15. Each character is selected by ASCII code from
30Hex to 7AHex.
No
o1-13 Frequency Reference and Frequency Related Monitor Custom Units 1
o1-14 Frequency Reference and Frequency Related Monitor Custom Units 2
o1-15 Frequency Reference and Frequency Related Monitor Custom Units 3
o1 1 o1 17 F1/F2 ey Function Selection
The HOA Keypad multi-function keys F1 and F2 can be set for different HVAC specific functions. Selects the functions of
the F1/F2 keys and the LCD display text above the F1/F2 keys.
Parameters o1-16 and o1-17 cannot be set to the same value (except for setting 0).
Note:
No
o1-16
o1-17
Settin Standard
Settin 1 Monitor
Settin 2 Dri e/Bypass (D
Settin Bypass un ( UN B P)
Settin o le elay Output ( L )
o1 18 o1 1 User De ined Parameter Upper/Lo er
Allows the user to set values that can be used as reference information.
No
o1-18
o1-19
1 2
Name
User-Set Display Units Maximum Value
Name
User-Set Display Units Decimal Display
Name
Name
F1 Key Function Selection
F2 Key Function Selection
/B P)
Name
User-Defined Parameter Upper
User-Defined Parameter Lower
Settin an e
Determined by
1 to 60000
Settin an e
Determined by
0 to 3
Settin an e
30H to 7AH
Settin an e
0 to 4
Settin an e
0 to 999
De ault
o1-03
De ault
o1-03
De ault
41H
De ault
0
0
De ault
0