YASKAWA CIMR-ZU A Series Programming Manual page 187

2
Assemble the clamping claw and sealing insert.
Note The clamping claw and sealing insert should fit together so that no opening remains and the sealing insert is not deformed.
A No openin remains and t e sealin insert is not de ormed
Place the clamping claw and sealing insert into the cable gland body then tighten the sealing nut into place.
A Sealin nut
B Sealin insert
The remaining space between the sealing nut and the clamping claw should be between 2.5 and 3.0 mm (0.10 to 0.12
in).
A Sealin nut
B Cable land body
Insert the cooling fan into the drive.
Note Use a magnetized screwdriver when inserting the screws to prevent the screws from falling.
A
Fi ure 2 Clampin Cla
A
B
C
D
Fi ure 2 7 eassemble t e Cable Gland
A
2.5 to 3.0 mm
(0.10 to 0.12 in)
Fi ure 2 8 Cable Gland
and Sealin Insert A 12
C Clampin cla
D Cable land body
A 12
B
C
C Fan unit
A 12
2 Dri e Coolin Fans
187
2