YASKAWA CIMR-ZU A Series Programming Manual page 144

1 11 S Special Parameters
S 8 Secondary PI Inte ral Limit Settin
Sets the maximum output possible from the integrator.
No
S3-08
S Secondary PI Output Upper Limit
Sets the maximum output possible from the secondary PI controller.
No
S3-09
S 1 Secondary PI Output Lo er Limit
Sets the minimum output possible from the secondary PI controller.
No
S3-10
S 11 Secondary PI Output Le el Selection
Sets the secondary PI controller output direction.
No
S3-11
Settin Normal Output (Direct Actin )
Settin 1 e erse Output ( e erse Actin )
S 12 Secondary PI Disable Mode
Selects the secondary PI controller output when disabled.
No
S3-12
Settin No Output (
Settin 1 Lo er Limit (S 1 )
Settin 2 Setpoint
S 1 Secondary PI Lo
Sets the secondary PI low feedback detection level.
No
S3-13
<1> Upper limit is S3-02, decimal place holder is determined by S3-03.
<2> Unit is determined by S3-04.
1
Name
Secondary PI Integral Limit Setting
Name
Secondary PI Output Upper Limit
Name
Secondary PI Output Lower Limit
Name
Secondary PI Output Level Selection
Name
Secondary PI Disable Mode
)
Feedbac Detection Le el
Name
Secondary PI Low Feedback Detection Level
Settin an e
0.0 to 100.0%
Settin an e
0 to 100.0%
Settin an e
-100.00 to 100.00
Settin an e
0 or 1
Settin an e
0 to 2
Settin an e
0.00 to 600.00
<1>
De ault
100.0%
De ault
100.0%
De ault
0.00%
De ault
0
De ault
0
De ault
0.00
<2>