YASKAWA CIMR-ZU A Series Programming Manual page 193

Installin t e Coolin Fan Unit 2A 1
Do not pinch the fan cable between parts when reassembling the fan unit.
Note:
1
Route the fan cable as shown in
Fi ure 2
2
Allow the fan cable to pass through the cable gland body then pull apart the opening in the sealing insert and fit the
insert around the cable.
A Clampin cla
B Sealin insert
Fi ure 2 1
Assemble the clamping claw and sealing insert.
Note The clamping claw and sealing insert should fit together so that no opening remains and the sealing insert is not deformed.
A No openin remains and t e sealin insert is not de ormed
Fi ure 2 2 Clampin Cla
Place the clamping claw and sealing insert into the cable gland body then tighten the sealing nut into place.
to 2A 27
Figure 2.50.
Fan Cable outin 2A 1
A
B
eassemble t e Cable Gland 2A 1
A
and Sealin Insert 2A 1
A 1 to A 2
to 2A 27 A 1 to A 2
C
C Openin
to 2A 27 A 1 to A 2
to 2A 27 A 1
2 Dri e Coolin Fans
to A 2
2
1