Trace Subsystem Commands - Agilent Technologies 86082A User Manual

TRACe Subsystem Commands

A TRACe or a DATA area is a named entity stored in instrument memory.
The commands in this subsystem have the following command hierarchy:
:TRACe [:DATA]
:X
[:Y] <trace_name>
:EXCHange <trace_1> | <trace_2>
:FEED
:CONTrol <trace_name>, ALWays | NEVer
:INPut <trace_name>, <numeric_value>
:POINts <trace_name>,<numeric_value>
:TRACe[:DATA]:X:STARt?
Returns the start value for the X-axis data for the trace.
The X-axis data will be evenly spaced points from STARt to STOP. The num-
ber of points is determined by the TRACe:POINts setting.
Syntax
: T R A C e [ : D ATA ] : X : S TA R t ? T R A | T R B | T R C | T R D | T R E | T R F
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
:STARt? <trace_name>
:STOP? <trace_name>
:TIMe:SSTop <trace_name>,<numeric_value>,<numeric_value>
:TIMestamp<trace_name>,year,month,date, hour,min,sec
:TYPE? <trace_name>
[:WAVelength]:SSTop <trace_name>,<numeric_value>,<numeric_value>
:[:POWER]/nquery
:RATio <trace_name>,<data_block>|<numeric_value>{,<numeric_value>}
Programming Commands
TRACe Subsystem Commands
6-101