Table of Contents
Advertisement
occur. Refer to "Performing a User Wavelength Calibration" on page 3-17 and
"Status Reporting for Laser Wavelength Zeroing" on page 3-13 for additional
information.
Key Path
System > Wavelength Calibration > Perform Calibration
Remote
CALibration:WAVelength:INTernal
Commands
Pit to Center
Places the lowest trace point at the center wavelength.
Key Path
Wavelength > Pit to Center
Related Functions
Pit Excursion
Remote
CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:MINimum
Commands
CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:SCENter
Pit Excursion (Marker Setup Panel)
Sets the pit excursion value for the marker search routines.
The pit excursion value is used to determine whether or not a local minimum
in the trace is to be considered a pit.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Pit excursion criteria
Function Reference
Pit to Center
2-41
Advertisement
Table of Contents
