Table of Contents
Advertisement
N o t e
The sweep time (ST) that is displayed in the lower portion of the display is the
time for the WDCA to sweep over one gain stage. The WDCA may take up to
three sweeps in three different gain stages to make the measurement. This
depends on the settings for sensitivity, reference level, auto range and also the
particular device being measured. The final data trace is a blended composite
of each trace taken in the different gain stages. For more information, refer to
"Increase in Sweep Time" on page 3-32
Key Path
Sweep > Precision Sweep Mode
Related Functions
Fast Sweep Mode, Normal Sweep Mode
Remote
[SENSe]:SWEep:SPEed
Commands
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Function Reference
Precision Sweep Mode
2-43
Advertisement
Table of Contents
