Table of Contents
Advertisement
N o t e
Once you change the password, you will need to remember it for future use.
You will not be able to access the remote front panel capabilities without
the new password.
7 From the command prompt, type Enable and then press Enter.
8 When prompted, Enter the IP number for the system, enter the IP
address for the UNIX workstation that you are using now and then press
Enter.
The remote front panel command will be displayed on the analyzer and the
analyzer will be restarted. You will be able to monitor the restarting process on
the PC display. Once the analyzer has finished restarting, the front panel will
be activated on your PC display.
9 You can now use the remote front panel just like you would if you were sitting
in front of the analyzer. Remember to use the main menu bar to access analyzer
functions and to enter data via the keyboard number keys.
10 When you are finished using the remote front panel, in the Map Display
window, type Disable. The analyzer will reboot into normal mode with the
remote front panel turned off. The analyzer display will close on the PC.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Remote Front Panel Operation
Remote Front Panel
4-13
Advertisement
Table of Contents
