Table of Contents
Advertisement
Delta Marker On/Off
This toggle function fixes the position of the reference marker and activates
the delta marker. This measures the difference between the active (reference)
marker and the delta marker. The front knob or keypad can be used to move
the delta marker to the desired location.
If the delta function is turned on and no marker is active, Marker #1 will be
turned on and placed at the center wavelength as a reference for the delta
marker.
Markers > More Marker Functions > Delta Marker
Key Path
Remote
CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:FUNCtion:DELTa:STATe
Commands
Delta Marker Units (Marker Setup Panel)
Sets the delta marker X-axis readout for frequency or wavelength when the
instrument is in a non-zero span. The available selections are nm, µ m, Ang,
GHz, and THz. The default units are nm (nanometers). This setting controls
all four delta markers. The normal and bandwidth markers have their own set-
tings.
Key Path
Markers > Marker Setup > Delta Marker Units
Related Functions
Delta Marker
Remote
CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:FUNCtion:DELTa:X:READout
Commands
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Function Reference
Delta Marker On/Off
2-15
Advertisement
Table of Contents
