Table of Contents
Advertisement
Status Listings
SCPI-Defined Errors
Table 7-1. Command Errors (4 of 4)
Error Number
–161
–168
–170
–171
–178
–181
–183
7-10
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Error Description [description/explanation/examples]
desc = "Invalid block data"
help = ""
[A block data element was expected, but was invalid for some reason (see IEEE
488.2, 7.7.6.2); for example, an END message was received before the length
was satisfied.]
desc = "Block data not allowed"
help = ""
[A legal block data element was encountered but was not allowed by the
device at this point in parsing.]
desc = "Expression error"
help = ""
[This error, as well as errors –171 through –179, are generated when parsing
an expression data element. This particular error message should be used if the
device cannot detect a more specific error.]
desc = "Invalid expression"
help = ""
[The expression data element was invalid (see IEEE 488.2, 7.7.7.2); for example,
unmatched parentheses or an illegal character.]
desc = "Expression data not allowed"
help = ""
[A legal expression data was encountered but was not allowed by the device at
this point in parsing.]
desc = "Invalid outside macro definition"
help = ""
[Indicates that a macro parameter placeholder ($<number) was encountered
outside of a macro definition.]
desc = "Invalid inside macro definition"
help = ""
[Indicates that the program message unit sequence, sent with a *DDT or *DMC
command, is syntactically invalid (see IEEE 488.2, 10.7.6.3).]
Advertisement
Table of Contents
