Table of Contents
Advertisement
Function Reference
Amplitude Setup
Amplitude Setup
Accesses the Amplitude Setup panel used to specify amplitude related func-
tions:
• amplitude display mode
• amplitude units
• auto ranging
• auto zero
• reference level position
Amplitude > Amplitude Setup...
Key Path
Related Functions
Reference Level, Sensitivity
Remote
(Amplitude Display Mode):DISPlay:WINDow:TRACe:Y:SCALe LINear
Commands
DISPlay:WINDow:TRACe:Y:SCALe LOGarithmic
(Amplitude Units):UNIT:POWer
(Auto Zero):CALibration:ZERO
(Reference Level Position):DISPlay:WINDow:TRACe:Y:SCALe:RPOSition
Amplitude Units (Amplitude Setup Panel)
Selects the amplitude scale's units. Selecting Auto for amplitude units allows
power to be shown in dB when using the logarithmic scale and in watts when
using the linear scale. Selecting W forces the readout to be in watts, regardless
of the amplitude scaling.
N o t e
There are two amplitude scales that can be viewed on the WDCA. The scale on
the left side of the display is for normalized traces and will only be displayed
when at least one active trace has normalization turned on. Active normalized
traces are indicated with a ">>". The scale on the right side of the display is for
non-normalized traces and will only be displayed when at least one active trace
is non-normalized. Active non-normalized traces are indicated with a "<<". In
the event that there is at least one normalized trace and one non-normalized
trace, both amplitude scales with be displayed on the screen.
Key Path
Amplitude > Amplitude Setup > Amplitude Units
2-6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
Table of Contents
