Table of Contents
Advertisement
Sweep Points
Specifies the number of data points taken for a sweep. The more data points
the better the trace resolution, but the longer the sweep time. You can select
from 3 to 9601 points. Enter the number of data points using the step keys,
numeric key pad, or knob. The default is 1001 points.
Key Path
Sweep > Sweep Points
SENSe:SWEep:POINts
Remote
Commands
System
Accesses menus for changing, displaying, selecting, and viewing the analyzer's
functions. Some of the functions available are:
• shows HW and critical errors, warnings and notices
• sets a title to the display
• displays the firmware revision
• sets printer setup
• moves the active function area
• displays the analyzer state information
• changes the display setup
• changes the time and dates
• selects the power-on state
• performs a factory preset
• upgrades the firmware
• zeros the instrument
• sets the wavelength limit
• sets the TransZ 2-3 lock
• changes the auto measure defaults
• sets the GPIB address
• turns laser on and off
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Function Reference
Sweep Points
2-61
Advertisement
Table of Contents
