Table of Contents
Advertisement
CALCulate[1|2|3|4|5|6]:MAXimum:CLEar
Remote
CALCulate[1|2|3|4|5|6]:MINimum:CLEar
Commands
CALCulate[1|2|3|4|5|6]:MAXimum:STATe
CALCulate[1|2|3|4|5|6]:MINimum:STATe
Restore Internal Memory
Accesses the analyzer Restore Utility. This operation will remove all existing
files from internal memory and replace them with files from a floppy disk.
These files are created using the Backup Internal Memory function.
Key Path
Save/Recall > Backup/Restore Menu > Restore Internal Memory
Revision
Displays the analyzer's firmware revision information.
Key Path
System > Help > Revision
Remote
*IDN?
Commands
Save (Save Setup Panel)
Selects whether all measurement data or only trace data will be saved.
When Measurement (All Visible + State) is selected, all instrument conditions
will be saved. The measurement data is saved in binary format (.dat file). This
includes the traces and all measurement conditions. The .dat file format can
only be read by the instrument. You will not be able to view this file on your
PC. When the file is recalled, the instrument state will be set to the same state
as when the file was saved.
The Trace(s) Only files are saved in comma separated variable (.csv) format.
When the file is recalled, the trace data is displayed under the current instru-
ment conditions.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Function Reference
Restore Internal Memory
2-49
Advertisement
Table of Contents
