Table of Contents
Advertisement
Function Reference
Peak Search
Reference Level
Related Functions
Remote
CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:MAXimum
Commands
CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:SRLevel
Peak Search
Places a marker on the highest amplitude trace point. If no marker is on,
Marker #1 will be used for the peak search.
See "General Tips for Using Traces and Markers" on page 3-29
Key Path
Markers > Peak Search
Markers > More Marker Functions > Marker Search Menu > Search Mode
Peak > Peak Search
Remote
CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:MAXimum
Commands
Peak Search at End of Each Sweep (Marker Setup
Panel)
Finds the peak value of the trace and moves the marker to the peak at the end
of each sweep. This function operates on normal, delta, and bandwidth mark-
ers.
Key Path
Markers > Marker Setup > Peak Search at End of Each Sweep
Perform Calibration
Performs a user wavelength calibration. The calibration process takes approx-
imately 2 minutes for a wavelength calibration and 3.5 minutes for a wave-
length calibration and Lambda Zeroing. The wavelength calibration should be
performed at least once a shift to ensure accurate measurements. A wave-
length calibration will automatically be performed when the operating temper-
ature of the TLS has changed so that a Lambda Zero alignment of the TLS will
2-40
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
Table of Contents
