Table of Contents
Advertisement
Remote Front Panel Operation
Remote Front Panel
Connecting to the Analyzer over the Network
You can remap the analyzer front panel over the network using a PC with an X
windowing emulator or a UNIX workstation running X Windows. The following
X windowing emulators have been tested to ensure correct analyzer remote
front panel operation.
• Reflection X revision 8.0.2
• X Win 32 revision 5.0
• UNIX with X Windows
Refer below for specific setup instructions.
Before using the remote front panel ensure:
• That the analyzer is connected to the local area network (LAN).
• There are no Proxies between the analyzer and the remote system.
• That the underlying network operates fast enough to allow for reasonable
operation of the analyzer.
• If using a PC to run the remote front panel operation, an X Windowing
emulator is available on the PC.
With the exception of the power switch and knob, all front panel analyzer
functionality is available when using the remote front panel. You can access
the analyzer functionality via the main menu bar and make any data entries
using the PC's keyboard.
4-6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
Table of Contents
