Table of Contents
Advertisement
Sending the command when the instrument is in a zero span will generate a
"Settings conflict" error.
Syntax
: C A L C u l a t e [ 1 | 2 | 3 | 4 | 5 | 6 ] : M E A N : R A N G e : U P P e r [ : WAVe l e n g t h ]
:CALCulate[1|2|3|4|5|6]:MEAN:STATe
Turns the mean power calculation for a trace
Only one mean power calculation can be turned on at a time. For example, if a
mean power calculation is being performed on trace A, turning a mean power
calculation for trace B
Syntax
: C A L C u l a t e [ 1 | 2 | 3 | 4 | 5 | 6 ] : M E A N : S TATe O F F | O N | 0 | 1
: C A L C u l a t e [ 1 | 2 | 3 | 4 | 5 | 6 ] : M E A N : S TATe ?
:CALCulate[1|2|3|4|5|6]:MINimum:CLEar
Clears the current minimum hold values for the trace and allows a new mini-
mum hold to occur.
The trace will be initialized to the current value of the trace. If the specified
trace is not in the minimum hold state, sending this command will have no
effect.
Syntax
: C A L C u l a t e [ 1 | 2 | 3 | 4 | 5 | 6 ] : M I N i m u m : C L E a r
Related Key
Reset Min/Max Hold
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
< n u m e r i c _ v a l u e > [ M | U M | N M | P M | A ]
will turn the calculation for trace A
ON
Programming Commands
CALCulate Subsystem Commands
or
.
ON
OFF
.
OFF
6-63
Advertisement
Table of Contents
