Table of Contents
Advertisement
Programming Commands
STATus Subsystem Commands
:STATus:PRESet
Clears the event registers and sets all bits in the enable registers.
The "STATus:PRESet command is defined by SCPI to affect the enable regis-
ter. If you want to clear all event registers and queues, use the *CLS com-
mand.
Table 6-4. Preset Values
Status Node
Operation enable register
Questionable enable register
PTRansition filters
NTRansition filters
Syntax
: S TAT u s : P R E S e t
Example
OUTPUT 720;":STATUS:PRESET"
Related
*CLS
Commands
:STATus:QUEStionable:CONDition?
Queries the contents of the questionable condition register.
Use this command to read the value of the QUEStionable Status register. Refer
to "Monitoring the Instrument" on page 5-20 for further information.
Syntax
: S TAT u s : Q U E S t i o n a b l e : C O N D i t i o n ?
Example
OUTPUT 720;":STATUS:QUEStionable:CONDITION?"
Query Response
Returns a value from 0 to 32767
6-94
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Preset Value
0
0
32767
0
Advertisement
Table of Contents
