Table of Contents
Advertisement
Using the Analyzer
Measurement Techniques
10 Press Traces > Active Trace > TrA to turn on trace A (the yellow trace).
11 Press Trace A Input 1 > Attach TRA to Input 1 to make trace A the active
trace for Receiver Input 1.
12 Press Active Trace > TrB to turn on trace B (the green trace).
13 Press Trace B Input 2 > Attach TRB to Input 2 to make trace B the active
trace for Receiver Input 2.
14 Press Sweep > Single Sweep.
Input 1 (the yellow trace) shows the insertion loss of the filter. Input 2 (the
green trace) shows the return loss of the filter.
Figure 3-12. Measuring return loss and insertion loss simultaneously
Spectrum re-printed courtesy of Hoya Corporation USA
3-28
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
Table of Contents
