Table of Contents
Advertisement
5 Connect the equipment as in Figure 3-10.
Figure 3-10. Normalize Receiver Input 1 setup
6 Press Normalize Input 1.
7 Connect the equipment as shown in Figure 3-11.
Figure 3-11. Measuring insertion loss and return loss setup
8 Press Wavelength and set the Center WL to the wavelength of the DUT.
9 Press Span and choose a narrow span. For example, 2 nm.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Using the Analyzer
Measurement Techniques
3-27
Advertisement
Table of Contents
