Table of Contents
Advertisement
Using the Analyzer
Using the Navigation Softkeys on a Setup Panel
Recalling Measurement and Trace Data
N o t e
To insure accurate measurements, a wavelength calibration should be
performed each time measurement or trace data is recalled from memory.
1 Press the front-panel Save/Recall key.
2 Press the Recall Menu.... softkey.
3 The Recall Setup panel opens.
The Recall Menu setup panel
Setup panel
Recall
selections
Selects whether a measurement or trace will be recalled.
Recall From
Selects whether to recall from a floppy disk or from internal memory.
3-8
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
Table of Contents
