Table of Contents
Advertisement
Marker BW
Used to measures the passband of the signal. To enter the bandwidth ampli-
tude of the bandwidth markers, make a selection from the softkeys
(–0.5, –3 dB, –6 dB, or –10 dB) or use the knob, step keys, or numeric keys.
If a peak search is not performed, then pressing Marker BW finds the band-
width around the currently active marker. If the bandwidth markers cannot be
placed at the selected value, an error message, such as "BW not found"
will be displayed.
See "Zooming in on a portion of a response" on page 3-21.
Key Path
Markers > More Marker Functions > Marker BW
Related Functions
Peak Search
Remote
(Marker BW On|Off) CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:FUNCtion
Commands
:BANDwidth:STATe
CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:FUNCtion:BANDwidth:INTerpolate
(-0.5 dB|-3 dB|-6 dB|-10 dB|-20 dB)CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]
:FUNCtion:BWIDwidth:NDB
CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:FUNCtion:BANDwidth:RESult?
Marker Off
Turns the current active marker off.
Key Path
Markers >Active Marker > Marker Off
Remote
CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:STATe OFF
Commands
CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:AOFF
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Function Reference
Marker BW
2-27
Advertisement
Table of Contents
