Table of Contents
Advertisement
TransZ 2-3 Lock
Prohibits the analyzer from using a transimpedance gain higher than the
10k ohm stage. The default state for transZ 2-3 lock is off.
Key Path
Systems> More System Functions > Service Menu > Adv Service Functions
> More Adv Service Menu > TransZ 2-3 Lock
Update A...F On|OFF
When on, the selected trace is updated after each sweep. When off, the trace
data will not be updated.
Key Path
Traces > Update
Related Functions
View A...F
Remote
SENSe:SWEep:POINts
Commands
TRACe:FEED:CONTrol TRA|TRB|TRC|TRD|TRE|TRF,ALWays
TRACe:FEED:CONTrol TRA|TRB|TRC|TRD|TRE|TRF,NEVer
Use Marker Search Threshold On/Off (Marker Setup
Panel)
When on, the marker search function ignores peaks below the threshold value.
A dotted line is shown on the display at the threshold level.
Key Path
Markers > Marker Setup > Use Marker Search Threshold
Related Functions
Pit Excursion, Peak Excursion, Marker Threshold Value
CALCulate:THReshold:STATe
Remote
Commands
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Function Reference
TransZ 2-3 Lock
2-65
Advertisement
Table of Contents
