Table of Contents
Advertisement
Programming Commands
CALCulate Subsystem Commands
:CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:X:TIME
Sets the X-axis value of the normal marker when the instrument is in zero
span.
When the delta function is
controlled. When the bandwidth function is
marker is controlled. The default units of the parameter is seconds.
Sending the command when the specified marker is off will turn the marker on
and place the marker at the desired position. Sending the command when the
instrument is in a non-zero span will generate a "Settings conflict" error.
Syntax
: C A L C u l a t e [ 1 | 2 | 3 | 4 | 5 | 6 ] : M A R K e r [ 1 | 2 | 3 | 4 ] : X : T I M E
< n u m e r i c _ v a l u e >
:CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:X[:WAVelength]
Tunes the marker to the supplied value.
Syntax
: C A L C u l a t e [ 1 | 2 | 3 | 4 | 5 | 6 ] : M A R K e r [ 1 | 2 | 3 | 4 ] : X : WAVe l e n g t h
:CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:Y?
Returns the Y-axis value of the normal marker.
When the delta function is on, the value returned is the absolute Y-axis value
of the delta marker. When the bandwidth function is on, the value returned is
the Y-axis value of the center marker.
Sending the command when the specified marker is off will generate a "Set-
tings conflict" error.
Syntax
: C A L C u l a t e [ 1 | 2 | 3 | 4 | 5 | 6 ] : M A R K e r [ 1 | 2 | 3 | 4 ] : Y ?
6-56
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
, the absolute X-axis value of the delta marker is
ON
[ M | U M | N M | P M | A ]
, the X-axis value of the center
ON
Advertisement
Table of Contents
