Table of Contents
Advertisement
Help
Opens a window displaying hardware errors, critical errors, notices, and warn-
ings as well as displaying the analyzer's current firmware revision. You can
print the queue, clear the queue, or page up and down to view the informa-
tion. If no hardware errors, critical errors, notices, or warnings have been gen-
erated, these functions will be shaded.
Key Path
System > Help
SYSTem:HELP:HEADer
Remote
SYSTem:ERRor?
Commands
*IDN
Hold A...F None Min Max (trace)
Hold Max compares the current amplitude value of each point on the active
trace in the current sweep to the corresponding point detected during the
previous sweep, then displays the maximum value.
Hold Min compares the current amplitude value of each point on a trace in the
current sweep to the corresponding point detected during the previous
sweep, then displays the minimum value.
Hold None turns the Hold function off.
Key Path
Traces > Hold None Min Max
Remote
CALCulate[1|2|3|4|5|6]:MAXimum:STATe
Commands
CALCulate[1|2|3|4|5|6]:MINimum:STATe
Laser State On Off
Sets the on/off state of the laser source.
Key Path
System > Laser State On Off
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Function Reference
Help
2-21
Advertisement
Table of Contents
