Table of Contents
Advertisement
############################################################
# Limit Line Type [Upper 1 | Lower 0]
############################################################
TYPE = 0
############################################################
# Point data
# x-value in meters,
# y-value in dB,
# connect to previous point [Yes 1 | No 0]
############################################################
POINTS =
1.54810e-6,-20,1
1.54812e-6,-3,1
1.54864e-6,-3,1
1.54866e-6,-20,1
Figure 3-15. L1548bpf.lim limit line file
3 Using the keyboard's arrow keys, scroll down to
"1" or "Upper". This indicates that this limit line will be used to test the upper
limits of the response.
4 Scroll down to the current data point entries. Click and drag all data entries to
select, then press the Delete key.
5 To specify the first data point at a wavelength of 1538 nm and an amplitude of
–18.8 db, type
The "1" indicates that this data point will be connected to the previous data
point. For the first data point only, the Connect to Previous Point parameter is
only used as a place holder. All other data points require this parameter to be
specified.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
.
1.538e-6, -18.8, 1
Using the Analyzer
Measurement Techniques
. Replace "0" with either
TYPE = 0
3-37
Advertisement
Table of Contents
