Table of Contents
Advertisement
Using the Analyzer
Measurement Techniques
Figure 3-1. Normalized trace at 0 dB
Tip: The normalized wavelength range is independent of the displayed mea-
surement wavelength range. This allows you to calibrate a wider wavelength
range and then perform a measurement on a subset of the normalized range.
However, if the wavelength range selected extends outside the normalized
wavelength range, only the normalized portion of the trace will be accurately
displayed.
The normalized trace will compensate for any losses due to the measurement
setup. For this setup, it would be just losses in the fiber and connections on
either end.
3-12
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
Table of Contents
