Table of Contents
Advertisement
Function Reference
Remote Setup
Remote Setup
Accesses the remote setup panel. The current GPIB address information is
indicated. To change the address, use the numerical entry keys or knob to
enter the new GPIB address information. If changes are made, press the Select
softkey. Press the Defaults softkey to reset the address to the factory preset
default.
Key Path
System> More System Functions > Remote Setup
Repeat Sweep
Sweeps the spectrum continuously and updates the measurement data after
each sweep. Repeat Sweep ensures evenly timed sweeps for a stable display of
the current tuning range. Sweeps will continuously repeat as long as the
instrument is in repeat sweep mode. The SWEEP indicator light on the front
panel of the analyzer is on when the sweep is in progress. To minimize wear on
the laser, repeat sweep will shut off automatically after 7000 sweeps.
Key Path
Sweep > Repeat Sweep
Related Functions
Single Sweep
Remote
INITiate:CONTinuous
Commands
Reset Min/Max Hold
Resets trace hold data and returns to the Traces function keys where you can
select an active trace, trace input, update, view, and hold functions.
Traces > Hold (trace) > Reset Min/Max Hold
Key Path
2-48
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
Table of Contents
