Agilent Technologies 86082A User Manual page 52

Markers > Active Marker
Key Path
Related Functions Active Trace, Peak Search, Pit Search, Marker to Center
Remote CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:STATe
Commands CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:AOFF
Active Trace
Accesses a menu to select an active trace for viewing, updating, or storing for
Receiver Input 1 or Receiver Input 2. To put a marker on a trace, or to make
changes to a trace, the trace must be active. There are six traces available.
N o t e There are two amplitude scales that can be viewed on the WDCA. The scale on
the left side of the display is for normalized traces and will only be displayed
when at least one active trace has normalization turned on. Active normalized
traces are indicated with a ">>". The scale on the right side of the display is for
non-normalized traces and will only be displayed when at least one active trace
is non-normalized. Active non-normalized traces are indicated with a "<<". In
the event that there is at least one normalized trace and one non-normalized
trace, both amplitude scales with be displayed on the screen.
See "General Tips for Using Traces and Markers" on page 3-29, "Moving the
Active Marker from One Trace to Another" on page 3-30, and "Measuring the
Delta between Two Traces" on page 3-30.
Key Path Traces > Active Trace
Markers > Active Trace
Related Functions Trace Math, View (Trace)
Remote CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:TRACe
Commands TRACe:FEED:INPute TRA,2
TRACe:FEED:CONTrol:TRA, ALWays
DISPlay:WINDow:TRACe TRA, ON
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Function Reference
Active Trace
2-3