Front Panel Functions To Remote Commands - Agilent Technologies 86082A User Manual

Programming Commands

Front Panel Functions to Remote Commands

Front Panel Functions to Remote Commands
This is a table of the front-panel functions of the WDCA and the corresponding
remote commands.
Table 6-2. Front Panel Function to Remote Command for the Measurement Applications (1 of 6)
Front Panel Function
Amplitude
Reference Level
Scale/Div
Sensitivity Auto | Man
Peak to Reference Level
Limit Lines
Load Limit Lines
Limit Line Tests 1 | 2 | Both | Off
Norm Ref
Normalize Setup
Start Wavelength
Stop Wavelength
Normalize Input 1
Normalize Input 2
Apply Input 1 Normalization
Apply Input 2 Normalization
Amplitude Setup
Amplitude Units
Auto Zero
Reference Level Position
Amplitude Display Mode Log | Linear
Local
Marker
6-4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Remote Command
DISPlay:WINDow:TRACe:Y:SCALe:RLEVel
DISPlay:WINDow:TRACe:Y:SCALe:PDIVision
Automatic mode command: SENSe:POWer:DC:RANGe:LOWer:AUTO
Manual mode command: SENSe:POWer:DC:RANGe:LOWer
CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:MAXimum
CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:SRLevel
MMEMory:LOAD:LLINE 1|2, <file_name>, [INTernal|FLOPpy]
CALCulate[1|2|3|4|5|6]:LLINe: [1| 2]:DISPlay
SENSe:NORMalize:WAVelength:STARt
SENSe:NORMalize:WAVelength:STOP
INITiate:NORMalize
INITiate:NORMalize
SENSe:NORMalize:ENABle
SENSe:NORMalize:ENABle
UNIT:POWer
CALibration:ZERO
DISPlay:WINDow:TRACe:Y:SCALe:RPOS
DISPlay:WINDow:TRACe:Y:SCALe LINear
DISPlay:WINDow:TRACe:Y:SCALe LOGarithmic
GPIB GoTo Local Command