Table of Contents
Advertisement
Programming Commands
CALCulate Subsystem Commands
:CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:SRANge:LOWer?
Returns the lower limit for the marker search range.
The range used for the marker search range is the same range used for the
trace mean range. The return value is in meters, unless span is set to zero, in
which case the return value is in seconds.
Syntax
: C A L C u l a t e [ 1 | 2 | 3 | 4 | 5 | 6 ] : M a r k e r [ 1 | 2 | 3 | 4 ] : S R A N g e : L O We r ?
:CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:SRANge:LOWer:FREQuency
Sets the lower limit for the marker search range.
Setting this value when :CALCulate[1|2|3|4|5|6]:Marker[1|2|3|4]:SRANge:STATe
is off will automatically turn :CALCulate[1|2|3|4|5|6]:Marker[1|2|3|4]:SRANge:
STATe on. The range used for the marker search range is the same range used
for the trace mean range. Changing the range with this command will change
ranges. Sending the command when the instrument is in a zero span will gen-
erate a "Settings conflict" error. The default units for the parameter is in
Hertz.
Syntax
: C A L C u l a t e [ 1 | 2 | 3 | 4 | 5 | 6 ] : M a r k e r [ 1 | 2 | 3 | 4 ] : S R A N g e : L O We r
:CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:SRANge:LOWer:TIME
Sets the lower limit for the marker search range.
Setting this value when
CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:SRANge:STATe is off will automati-
cally turn CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:SRANge:STATe on. The
range used for the marker search range is the same range used for the trace
mean range. Sending this command while span is not set to zero will results in
a "Settings conflict" error. Default units for the parameter is in seconds.
Syntax
: C A L C u l a t e [ 1 | 2 | 3 | 4 | 5 | 6 ] : M a r k e r [ 1 | 2 | 3 | 4 ] : S R A N g e : L O We r : T I M E
6-50
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
: F R E Q u e n c y < p a r a m >
< p a r a m >
Advertisement
Table of Contents
