Table of Contents
Advertisement
Function Reference
Attach Trace A to Input 1
Attach Trace A to Input 1
Associates the active trace to Receiver Input 1. You can assign up to six traces
to one input. For example, you may choose to assign three traces to input 1.
Trace A could have View on, but Update turned off. Trace B could have
Update on with Max Hold on. Trace C could have Update and View on.
Key Path
Traces > Trace A Input > Attach TRA to Input 1
View (trace), Update (trace)
Related Functions
Remote
TRACe:FEED:INPut TRA, 1
Commands
Attach Trace A to Input 2
Associates the active trace to Receiver Input 2. You can assign up to six traces
to one input. For example, you may choose to assign three traces to input 2.
Trace A could have View on, but Update turned off. Trace B could have
Update on with Max Hold on. Trace C could have Update and View on.
Key Path
Traces > Trace Input A > Attach TRA to Input 2
Related Functions
View (trace), Update (trace)
Remote
TRACe:FEED:INPut TRA, 2
Commands
Auto Ranging (Amplitude Setup Panel)
When on, allows the WDCA to achieve the desired sensitivity by taking several
sweeps and switching between gain stages. The final trace data is a blended
composite of each trace taken in the different gain stages.
2-8
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
Table of Contents
