Table of Contents
Advertisement
Using the Analyzer
Using the Navigation Softkeys on a Setup Panel
Backing Up or Restoring the Internal Memory
1 Press the front-panel Save/Recall key.
2 Press the Backup/Restore Menu.... softkey.
Softkey panel
Backup Internal Memory
selections
A WDCA Backup Utility screen appears asking you to insert a formatted
floppy disk in the external drive. The Backup Internal Memory function over-
writes the floppy disk with a new image. Any existing files or catalogs on the
floppy disk will be destroyed. The disk will not be viewable on a PC and no
trace or measurement files can be saved onto the disk until it is reformatted.
Any successive backup operations will overwrite the previous backup informa-
tion, so only the latest backup information can be recovered through the
Restore Internal Memory operation.
Restore Internal Memory
A WDCA Restore Utility screen appears. This operation will remove all files
from internal memory and replace them with files from backup floppy disks.
Moving the Active Function Area
The active function area on the display can be moved to eight different loca-
tions. This will allow you to place the active area in a location that will not
interfere with the trace information.
1 Press the front-panel System key.
2 Press the Move Active Area softkey. Each press of the softkey moves the
active function area to one of eight onscreen locations.
3-4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
Table of Contents
