Table of Contents
Advertisement
Programming Commands
CALCulate Subsystem Commands
:CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:FUNCtion:DELTa:Y:
REFerence?
Returns the Y-axis value of the reference marker.
This query generates a "Settings conflict" error if the delta function is off for
the specified marker.
Syntax
:
C A L C u l a t e [ 1 | 2 | 3 | 4 | 5 | 6 ] : M A R K e r [ 1 | 2 | 3 | 4 ] : F U N C t i o n : D E LTa
:CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:FUNCtion:PRESet
Turns off all marker functions for the specified marker. This command is pro-
vided as a convenient way to turn all marker functions off without having to
check the state of each individual marker function. If the marker specified by
this command is off, the marker will be turned on with all marker functions off,
that is, the marker will be in the "normal" marker mode.
Syntax
: C A L C u l a t e [ 1 | 2 | 3 | 4 | 5 | 6 ] : M A R K e r [ 1 | 2 | 3 | 4 ] : F U N C t i o n : P R E S e t
:CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:INTerpolate
Turns the normal/delta marker interpolation on or off.
When interpolation is on, the normal/delta markers will be placed at the exact
X setting, if the trace data allows. The marker will linearly interpolate between
two true trace data points. The default state is off.
This setting controls the interpolation state for all four markers, except for the
bandwidth markers.
Syntax
: C A L C u l a t e [ 1 | 2 | 3 | 4 | 5 | 6 ] : M a r k e r [ 1 | 2 | 3 | 4 ] : I N Te r p o l a t e O F F | O N | 0 | 1
: C A L C u l a t e [ 1 | 2 | 3 | 4 | 5 | 6 ] : M a r k e r [ 1 | 2 | 3 | 4 ] : I N Te r p o l a t e ?
Normal/Delta Marker Interpolation On|Off
Related Key
6-44
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
: Y: R E F e r e n c e ?
Advertisement
Table of Contents
