Table of Contents
Advertisement
Function Reference
Fast Meas Save
Fast Meas Save
Accesses the Fast Measure Save function to save the measurement to internal
memory. The instrument saves the current measurement state to internal
memory as FASTSAVE.dat. Only one FASTSAVE.dat file exists, so performing
a Fast Meas Save will overwrite any currently existing Fast Save file.
Key Path
Save/Recall > Fast Meas Save
Save
Related Functions
Fast Sweep Mode
Selects the fastest sweep mode. Fast mode allows wider spans with faster
sweep speed. In this mode you can measure filters with multiple channels or
see if the rejection band holds over wide ranges. Fast sweep mode may not be
appropriate to use if the filter has very sharp responses. The fast sweeping
speed may not accurately display the signal.
N o t e
The sweep time (ST) that is displayed in the lower portion of the display is the
time for the WDCA to sweep over one gain stage. The WDCA may take up to
three sweeps in three different gain stages to make the measurement. This
depends on the settings for sensitivity, reference level, auto range and also the
particular device being measured. The final data trace is a blended composite
of each trace taken in the different gain stages. For more information, refer to
"Increase in Sweep Time" on page 3-32.
Key Path
Sweep > Fast Sweep Mode
Related Functions
Normal Sweep Mode, Precision Sweep Mode
Remote
[SENSe]:SWEep:SPEed
Commands
2-18
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
Table of Contents
