Table of Contents
Advertisement
Function Reference
Stop WL
Stop WL
Specifies the stop wavelength. The center wavelength and span are adjusted
so that:
Stop
Use the knob, step keys, or numeric keys to enter the desired value.
If the instrument is in zero span, this command sets the center wavelength to
the value specified.
The default for stop wavelength is 1555 nm.
The maximum value for the stop wavelength will vary depending on the TLS
used in the system.
Key Path
Wavelength > Stop WL
Related Functions
Span, Start WL, Center WL
Remote
SENSe:WAVelength:STOP
Commands
Sweep
Accesses a menu for changing sweep settings. These functions can also be
accessed from the Measure menu Sweep selection. The function keys include:
• Fast Sweep Mode
• Normal Sweep Mode
• Precision Sweep Mode
• Repeat Sweep
• Single Sweep
• Sweep Points
2-60
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Span
=
Center
+
------------ -
2
Option
Band
111
C Band
112
L Band
Start wavelength
Stop wavelength
1480 nm
1575 nm
1520 nm
1620 nm
Advertisement
Table of Contents
