Table of Contents
Advertisement
Configure Network
Starts a utility to enable and configure networking. Enter this menu only if you
have all the necessary networking parameters. Refer to "Information and
Equipment Required for the Configuration Process" on page 4-2.
Key Path
System > More System Functions > Service Menu > Configure Network
Current GPIB Address (Remote Setup Panel)
Displays the GPIB address currently being used. To change the address, use
the numeric keys or knob to enter the new GPIB address information in the
Remote Setup panel.
Key Path
System > More System Functions > Remote Setup
Default Math Trace C
Defines the math expression to be used and turns the math operation on:
C=A
The math operation is performed in linear units.
See "Upper and lower limit lines showing pass/fail test" on page 3-39 and See
"Using Trace Math to Measure Wavelength Drift" on page 3-41.
Traces > More Trace Functions > Trace Math Off > Default Math Trace C
Key Path
CALCulate3:MATH:STATE OFF|ON|0|1
Remote
Commands
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
-B, C=A
+B, C=A
-B, or C=A
LOG
LOG
LIN
Function Reference
Configure Network
+B. The result is placed in Trace C.
LIN
2-13
Advertisement
Table of Contents
