Table of Contents
Advertisement
Precision Sweep Mode
Related Key
Normal Sweep Mode
Fast Sweep Mode
[:SENSe][:WAVelength]:CENTer
Specifies the center wavelength.
The start and stop wavelength and, if necessary, the span are adjusted so that:
Center
Syntax
[ : S E N S e ] [ : WAVe l e n g t h ] : C E N Te r < n u m e r i c _ v a l u e >
[ : S E N S e ] [ : WAVe l e n g t h ] : C E N Te r ?
Center WL
Related Key
[:SENSe][:WAVelength]:CENTer:STEP:AUTO
When on, the step size is automatic. When off, the step size is fixed. The value
is set by the [SENSe:][WAVelength:]CENTer:STEP[:INCRement] command.
Syntax
[ : S E N S e ] [ : WAVe l e n g t h ] : C E N Te r : S T E P : A U T O O F F | O N | 0 | 1
[ : S E N S e ] [ : WAVe l e n g t h ] : C E N Te r : S T E P : A U T O ?
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Span
------------ -
and
=
Start
+
2
[ M | U M | N M | P M | A | H Z | K H Z | M H Z | G H Z | T H Z ]
Programming Commands
SENSe Subsystem Commands
Span
------------ -
Center
=
Stop
–
2
6-87
Advertisement
Table of Contents
