Table of Contents
Advertisement
Next Pit Up
Places the active marker on the next lowest pit from the current marker
amplitude. This pit must meet the pit excursion and threshold criteria. If the
specified marker is off, it will be turned on and placed at the center wave-
length. The search for the next minimum will reference that point.
Markers > More Marker Functions > Marker Search Menu > Next Pit ↑
Key Path
CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:MINimum:NEXT
Remote
Commands
Normal/Delta Marker Interpolation (Marker Setup
Panel)
Turns the normal/delta marker interpolation on or off. When on, the normal/
delta markers will be placed at the exact wavelength or frequency value
selected if it is within the trace range. The marker will linearly interpolate
between two trace data points. When off, the marker will be placed on the
nearest trace data point.
This setting enables interpolation for all four markers when in normal or delta
mode.
Key Path
Markers > Marker Setup > Normal/Delta Marker Interpolation
Related Functions
Active Marker, Delta Marker
Remote
CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:INTerpolation
Commands
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
↑
Function Reference
Next Pit Up ↑
2-33
Advertisement
Table of Contents
