Agilent Technologies 86082A User Manual page 72

Traces > More Trace Functions > Trace Math OFF > Default Math Trace C
Key Path
> Lin Math C=A–B
Remote CALCulate3:MATH:EXPRession(TRA–TRB)
Commands
Lin Math C=A+B
Adds Trace A and Trace B point by point, then stores the results in Trace C in
linear units. The results of this function often require a reference level adjust-
ment. Trace A is placed in View On mode. Trace math is mainly used to nor-
malize the display during stimulus-response measurements.
Key Path Traces > More Trace Functions > Trace Math OFF > Default Math Trace C
> Lin Math C=A+B
Remote CALCulate3:MATH:EXPRession(TRA+TRB)
Commands
Line Markers Off
Turns off all line markers and line marker functions.
Key Path Markers > More Marker Functions > Line Marker Menu > Line Markers Off
Remote CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:SRANge:OFF
Commands
Load Limit Line 1/2
Allows you to select from the available limit lines for limit line testing. Each
limit line file is designated as either upper or lower limit lines for use in the
limit line test. An upper limit line is identified by a "u" at the beginning of the
file name. A lower limit line is identified by an "l" at the beginning of the file
name.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Function Reference
Lin Math C=A+B
2-23