Subaru LEGACY 2006 Manual page 86

asieps_tobira.book 20 ページ ２００９年１０月２６日 月曜日 午前９時１６分
COOLING
15) Disconnect the radiator inlet hoses from the en-
gine.
16) Remove the radiator upper brackets.
17) Lift the radiator up and away from vehicle.
B: INSTALLATION
1) Attach the radiator lower cushion to the hole on
the radiator lower bracket.
2) Install the radiator to vehicle.
NOTE:
Make pins on the lower side of radiator be fitted into
the radiator lower cushions on body side.
Radiator
3) Install the radiator upper brackets and tighten
the bolts.
Tightening torque:
12 N·m (1.2 kgf-m, 8.9 ft-lb)
CO-00277
4) Connect the radiator inlet hose.
CO-00278
5) Install the air intake duct. <Ref. to IN(H4SO)-8,
INSTALLATION, Air Intake Duct.>
6) Install the hood stay holder.
CO-00041
7) Install the reservoir tank. <Ref. to CO(H4SO)-
27, INSTALLATION, Reservoir Tank.>
8) Connect the over flow hose.
9) Lift-up the vehicle.
CO(H4SO)-20
CO-00278
CO-00277
CO-00276