Subaru LEGACY 2006 Manual page 877

asieps_tobira.book 21 ページ ２００９年１０月２６日 月曜日 午前９時１６分
3. Generator
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Disconnect the connector and terminal from
generator.
• 2.5 L Non-turbo model
• 3.0 L Non-turbo model
• Turbo model
3) Remove the V-belt covers.
Generator
4) Remove the V-belts.
<Ref. to ME(H4SO)-36, FRONT SIDE BELT, RE-
MOVAL, V-belt.> or <Ref. to ME(H4DOTC)-36,
FRONT SIDE BELT, REMOVAL, V-belt.> <Ref. to
ME(H6DO)-32, REMOVAL, V-belt.>
5) Remove the bolts which install the generator
onto bracket.
IN-00203
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
25 N·m (2.5 kgf-m, 18.1 ft-lb)
CAUTION:
Check and adjust the V-belt tension.
<Ref. to ME(H4SO)-37, INSPECTION, V-belt.>
<Ref. to ME(H4DOTC)-38, INSPECTION, V-belt.>
<Ref. to ME(H6DO)-32, INSPECTION, V-belt.>
SC-00178
SC-02003
ME-00830
SC(H4SO)-21
STARTING/CHARGING SYSTEMS
SC-00179
SC-00179