Subaru LEGACY 2006 Manual page 802

asieps_tobira.book 30 ページ ２００９年１０月２６日 月曜日 午前９時１６分
MECHANICAL
20) Remove the pitching stopper.
21) Disconnect the fuel hoses from fuel pipe.
(1) Disconnect the quick connector on the fuel
delivery line by pushing the ST in the direction
of the arrow.
ST 42099AE000 CONNECTOR REMOVER
(2) Remove the clip and disconnect the evapo-
ration hose from the pipe.
WARNING:
• Be careful not to spill fuel.
• Catch the fuel from hoses using a container
or cloth.
(A) Fuel delivery hose
(B) Evaporation hose
22) Support the engine with a lifting device and
wire ropes.
Engine Assembly
ME-00213
ST
FU-02866
LU-00222
ME(H4SO)-30
23) Support the transmission with a garage jack.
CAUTION:
Doing this is very important because the trans-
mission lowers for its own weight. This work is
also of great importance for facilitating reinstal-
lation.
(A) Transmission
(B) Garage jack
CAUTION:
Before removing the engine away from trans-
mission, check to be sure no work has been
overlooked.
24) Separation of engine and transmission.
(1) Remove the starter. <Ref. to SC(H4SO)-6,
REMOVAL, Starter.>
(2) Remove the bolts which hold upper side of
transmission to engine.
25) Attach the ST to the converter case. (AT mod-
el)
ST 498277200 STOPPER SET
(A)
(B)
ME-00215
ME-00216
ST
ME-00217