Subaru LEGACY 2006 Manual page 736

asieps_tobira.book 52 ページ ２００９年１０月２６日 月曜日 午前９時１６分
FUEL INJECTION (FUEL SYSTEMS)
25.Fuel Level Sensor
A: REMOVAL
WARNING:
• Place "NO FIRE" signs near the working area.
• Be careful not to spill fuel.
NOTE:
The fuel level sensor is built in fuel pump assembly.
1) Remove the fuel pump assembly. <Ref. to
FU(H4SO)-50, REMOVAL, Fuel Pump.>
2) Disconnect the connector from fuel pump brack-
et.
3) Remove the fuel level sensor and fuel tempera-
ture sensor.
(A)
(B)
(A) Connector
(B) Fuel Temperature Sensor
(C) Fuel level sensor
B: INSTALLATION
Install in the reverse order of removal.
Fuel Level Sensor
(C)
FU-02671
FU(H4SO)-52