Subaru LEGACY 2006 Manual page 751

asieps_tobira.book 7 ページ ２００９年１０月２６日 月曜日 午前９時１６分
4. Air Intake Chamber
A: REMOVAL
1) Loosen the clamp (A) which connects air intake
chamber to throttle body.
2) Loosen the clamp (B) which connects the duct to
air intake chamber.
3) Remove the bolt (C) which secures air intake
chamber to the stay.
4) Disconnect the connector (D).
(B)
(C) (D)
5) Disconnect the blow-by hoses, and then remove
air intake chamber.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
Clamp (A), (B)
3.0 N·m (0.3 kgf-m, 2.2 ft-lb)
Bolt (C)
6.5 N·m (0.66 kgf-m, 4.8 ft-lb)
(B)
(C)
C: INSPECTION
1) Check for cracks or loose connection.
2) Inspect that no foreign objects are mixed in the
air intake chamber.
Air Intake Chamber
(C)
(A)
IN-02141
(C)
(A)
IN-02142
IN(H4SO)-7
INTAKE (INDUCTION)