Subaru LEGACY 2006 Manual page 734

asieps_tobira.book 24 ページ ２００９年１０月２６日 月曜日 午前９時１６分
Manifold Absolute Pressure Sensor
FUEL INJECTION (FUEL SYSTEMS)
9. Manifold Absolute Pressure
Sensor
A: REMOVAL
1) Disconnect the ground cable from the battery.
IN-00203
2) Disconnect the connector from manifold abso-
lute pressure sensor.
FU-02728
3) Remove the manifold absolute pressure sensor
from throttle body.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Use new O-rings.
Tightening torque:
2.0 N·m (0.20 kgf-m, 1.5 ft-lb)
FU(H4SO)-24