Subaru LEGACY 2006 Manual page 110

asieps_tobira.book 12 ページ ２００９年１０月２６日 月曜日 午前９時１６分
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
11.Pressure Control Solenoid
Valve
A: REMOVAL
1) Set the vehicle on a lift.
2) Disconnect the ground cable from the battery.
3) Lift-up the vehicle.
4) Disconnect connector (A) from the pressure con-
trol solenoid valve.
5) Disconnect the evaporation hose (B) from the
pressure control solenoid valve.
6) Remove the bolts (C) which secure the bracket
to the fuel tank.
(B)
(C)
7) Remove the pressure control solenoid valve
from the bracket.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
7.35 N·m (0.7 kgf-m, 5.4 ft-lb)
C: INSPECTION
Make sure the hoses are not cracked or loose.
Pressure Control Solenoid Valve
IN-00203
(A)
(B)
EC-02086
EC-02087
EC(H4SO)-12